Apply EIG-R chip on top of packed snow and ice to create a non-slip surface. Or prior to light snowfall, frost, or ice as a proactive treatment.

• Optimal cost savings are achieved when there are consecutive nights of frost or light snow

• During a thaw/freeze cycle, the EIG-R Chip will largely stay in place on the surface and re-embed in frost and ice as it forms. Any loss can be replaced during re-application

• EIG-R Chip will accumulate over the season, a corresponding reduction in the volume necessary for reapplication is significantly less than salt and other alternatives

Eco Ice Chips treated softwood traction chips are hygroscopic. They attract surrounding moisture. When the moisture freezes it holds the chips firmly in place.

A one cubic meter Bulk Bag will cover approximately 2,500 square metres as an initial application.

–

Product is proven for use with conventional spreading equipment. Calibrate for reduced output when less replenishment is required.
–

Chips are infused with a formulated pH neutral brine that ensures the product remains spreadable in sub-zero temperatures and can be stored outside.

Eco Ice Chips treated softwood traction chips are hygroscopic. They attract surrounding moisture. When the moisture freezes it holds the chips firmly in place.

A one cubic meter Bulk Bag will cover approximately 2,500 square metres as an initial application.

–

Product is proven for use with conventional spreading equipment. Calibrate for reduced output when less replenishment is required.
–

Chips are infused with a formulated pH neutral brine that ensures the product remains spreadable in sub-zero temperatures and can be stored outside.

The suggested application rate of EcoIceGrip-R is approximately 1L per 3 square metres, or 8-12 chips under a typical footprint.

“From start to finish you have been very helpful and professional and I would recommend your services to others”

Order your FREE 10 litre sample

COVERAGE 10 LITRES = 30m2